Use and Care Manual

Page 8
SET UP & USE
PROTECTION FROM HEAT AND MOISTURE
• Do not install your freezer in any location where heavy moisture is present or if
the location is not properly insulated. This freezer is not designed to operate
in temperature setting below 55° Fahrenheit.
• Location for the freezer should be on a hard surface and away from direct
sunlight and heat source, e.g., radiators, baseboard heaters, cooking
appliances, etc.
DOOR ALIGNMENT AND REVERSAL
The freezer comes with the hinge located on the right so the opening of the
freezer is on the left. If you would like to change this please follow the door
reversal instructions for the applicable model.
CAUTION: To avoid personal injury to yourself and/or property, we recommend
someone assist you during the door reversal process.
CCUL5W, CCUL5B, CCUL5WV, CCUL5BV (WITHOUT WORKTOP)
DOOR ALIGNMENT
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a Phillips head screwdriver.
3. Adjust the door and then Re-tighten the screws.
DOOR REVERSAL
FIGURE 1 (original position)
FIGURE 2 (Position after door reversal)
Top hinge cover
Top
hinge
Screw hole cover
Pin cap
4 Screws
+Leg
4 Screws + Leg
Leg
Leg
Top hinge cover
Top hinge
Screw hole cover
Pin cap