Product Brochure

www.tnb.com
United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
F-76
Metric Connectors for Copper Conductor
Connectors & Grounding
—
Blackburn
®
Compression Connectors Featuring the Color-Keyed
®
System
Blackburn
®
metric lugs are manufactured from electrolytic copper
tube. The dimensions of the tube are designed to obtain the most
efficient electrical conductivity and mechanical strength, resisting
vibration and pull out.
Blackburn
®
metric lugs are annealed to guarantee optimum
ductility, which is a necessity for compression connectors having
to withstand severe deformation arising when compressed or
bending of the tongue that may happen during installation.
Connectors have to perform adequately with vibration loads,
and annealing is necessary to avoid material failure between
the barrel and the tongue.
The presence of an inspection hole facilitates full insertion of the
conductor, and the barrel length is designed to allow easy and
accurate positioning of the dies during the crimping operation.
Lugs are electrolytically tin-plated to eliminate oxidation of
the copper material. Blackburn
®
metric lugs complement our
connector family and meet a growing need for customer’s
connector requirements. Details of the appropriate crimping tools
and dies are included. Our Technical Services group is always
available to provide any technical advice required. Please contact
them if sizes are needed additional to those shown
in this catalog.
LISTED
WIRE CONNECTOR
71 RA
Cat. No.
CoNd. Size Sqmm
Ø
Stud
mm
dimeNSioNS (mm)
Std.
Pkg.
6 toN
tBm62BSCR
(CRimPS)
14 toN
BPLt14BSCRi
(CRimPS)
26 toN
tBm26mCC
(CRimPS)
60 toN
tBm60mCC
(CRimPS)
Low
StRaNded
|
FLexiBLe Øi B m N L d
mCC6m4 4 3,6 8,0 5,0 4,0 21,5 4,3 100
MCD6-6
(1)
mCC6m5 4÷6 5 3,6 9,0 6,5 6,0 25,0 5,3 100 N/A N/A N/A
mCC6m6 6 3,6 11,0 7,0 6,0 25,5 6,4 100
mCC10m4 4 4,6 10,0 5,0 4,0 22,5 4,3 100
MCD10-6
(1)
MCD10-14
(1)
mCC10m5* 5 4,6 10,0 6,5 6,0 26,0 5,3 100
mCC10m6* 10 6 4,6 11,0 7,0 6,0 26,5 6,4 100 N/A N/A
mCC10m8* 8 4,6 15,0 9,0 8,0 30,5 8,4 100
mCC10m10* 10 4,6 18,0 11,0 10,0 34,5 10,5 100
mCC16m4* 4 5,8 11,5 5,0 4,0 25,5 4,3 100
MCD16-6
(1)
MCD16-14
(1)
mCC16m5* 5 5,8 11,5 6,5 6,0 29,0 5,3 100
mCC16m6* 16 6 5,8 11,5 7,0 6,0 29,5 6,4 100 N/A N/A
mCC16m8* 8 5,8 15,0 9,0 8,0 33,5 8,4 100
mCC16m10* 10 5,8 18,0 11,0 10,0 37,5 10,5 100
mCC25m5*
25
5 7,0 14,0 6,5 6,0 31,5 5,3 100
MCD25-6
(1)
MCD25-14
(1)
N/A N/A
mCC25m6* 6 7,0 14,0 7,0 6,0 32,0 6,4 100
mCC25m8* 8 7,0 15,0 9,0 8,0 36,0 8,4 100
mCC25m10* 10 7,0 18,0 11,0 10,0 40,0 10,5 100
mCC35m5*
25
35
5 8,9 17,0 6,5 6,0 34,0 5,3 100
MCD35-6
(1)
MCD35-14
(1)
mCC35m6* 6 8,9 17,0 7,0 6,0 34,5 6,4 100
mCC35m8* 35 8 8,9 17,0 9,0 8,0 38,5 8,4 100 N/A N/A
mCC35m10* 10 8,9 19,0 11,0 10,0 42,5 10,5 100
mCC35m12* 12 8,9 21,0 14,0 12,0 47,5 13,2 50
mCC50m8*
35
50
8 10,0 19,0 9,0 8,0 42,5 8,4 50
MCD50-6
(2)
MCD50-14
(1)
mCC50m10* 50 10 10,0 20,0 11,0 10,0 46,5 10,5 50 N/A N/A
mCC50m12* 12 10,0 21,0 14,0 12,0 51,5 13,2 50
mCC70m6*
50
70
6 11,3 21,0 8,0 7,0 44,0 6,4 50
MCD70-6
(2)
MCD70-14
(1)
mCC70m8* 8 11,3 21,0 9,0 8,0 46,0 8,4 50
mCC70m10* 70 10 11,3 21,0 11,0 10,0 50,0 10,5 50 N/A N/A
mCC70m12* 12 11,3 22,0 14,0 12,0 55,0 13,2 50
mCC70m16* 16 11,3 26,0 18,0 16,0 63,0 17,0 50
mCC95m8*
70
95
8 13,5 25,0 9,0 8,0 52,5 8,4 25
MCD95-6
(2)
MCD95-14
(1)
mCC95m10* 95 10 13,5 25,0 11,0 10,0 56,5 10,5 25 N/A N/A
mCC95m12* 12 13,5 25,0 14,0 12,0 61,5 13,2 25
*UL
®
Listed
Note: See metric compression tools on p.
F-100.
One-Hole Metric Lugs