Installation Guide

13 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
7
Restoring power
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
Downrod Mounting (continued)
FF
5
Making the electrical connections
□ Connect the hot and neutral (black and white) wires from
the power supply box to the same color wires from the
electrical box.
□ Connect the green wire from the power supply box to the
grounding wire from the electrical box.
□ If 0-10v dimming circuit is available, connect the purple
and gray wires from the power supply box to the same
color wires from the electrical box.
□ If dimming is not desired, wrap the ends of the purple and
gray wires with electrical tape to cover the wire.
□ Cover the wire connections using the wire connectors (EE).
□ Wrap the wire connectors (EE) with electrical tape for a
more secure connection.
□ Position the wires back inside the power supply box.
Power Supply Box
EE
BB
A
6
Reattaching the power supply box to the fixture body
□ Align the screw holes in the fixture body (A) with the screw holes in the power supply box, making sure all wiring is thoroughly
tucked inside the power supply box.
□ Fasten the fixture body (A) to the power supply box with the previously removed screws, using the power tool hex bit (FF).
A
Power Supply Box
BB
A