Manualshelf

Installation Guide

ManualsBrandsCommercial Electric ManualsCommercial Lighting2 ft. 400-Watt Equivalent Integrated LED Dimmable White High Bay Light High Output 18,000 Lumens 5000K Daylight (4-Pack)
12345678910
6
Suspension Mounting (continued)
CC
BB
A
A
CC
6
Attaching the chain to the ceiling
□ Hang the fixture body by placing one chain (CC) over each hook (not included) that has been installed on the ceiling.
□ Adjust the chains to level the light. The fixture must hang at least 3 in. from the ceiling.
□ Feed the wiring through an appropriate conduit based on local electrical code.
CAUTION: Check local electrical code to determine the appropriate type of conduit for the wiring. Do not leave the wiring exposed.
A
CC
5
Preparing the fixture body for mounting
□ Attach the hook on one end of the cable set (BB) to a hanging hole on the fixture body (A) and close the hook with pliers to
secure it.
□ Attach the hook on the other end of the cable set (BB) to the other hanging hole on the same end of the fixture body (A) and
close the hook with pliers to secure it.
□ Attach the S-hook on one end of the mounting chain (CC) to the center of the cable set (BB) and
close the hook with pliers to secure it.
□ Repeat these steps with the second cable set (BB) and mounting chain (CC) on the
opposite end of the fixture body (A).
CC
BB
BB