Installation Guide

9 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Surface Mounting (continued)
AA
Power Supply Box
Power Supply Box
Keyholes
DD
4
Mounting the power supply box
Pull the electrical wires from the electrical box through the knock-out hole in the power supply box.
Align the large ends of the keyholes in the power supply box with the mounting screws (DD), allowing the heads of the screws
(DD) to come through the large ends of the keyholes.
Rotate the power supply box until the heads of the mounting screws (DD) slide into the narrow ends of the keyholes.
Tighten the mounting screws (DD) to secure the power supply box to the cover plate (AA) and electrical box.
5
Attaching the fixture body to the power supply box
Attach the open hooks on the ends of the cable sets (BB) to the hanging holes on the fixture body (A).
Close the hook openings with pliers.
Connect the two ends of the Quick Connect wires.
A
BB
Quick
Connect