Instructions / Assembly

4
Installation
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts
with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Item 1002948951 /Model # 53196101 and Item 1002948978 /Model # 53196102 should be installed in 4 in.
housings only.
Item 1002948987 /Model # 53197101 and Item 1002959912 /Model # 53197102 should be installed in 6 in.
housings only.
1
Turning off the power
□ Make sure the power is turned off at the source
to the recessed can housing where the fixture
will be installed. Remove the existing bulb and
trim, revealing the socket.
NOTE: Stick the replacement label on the inner wall of
the recessed housing before installation.
2
Connecting the socket adapter
□ Screw the medium base (E26) socket adapter
(B) into the socket in the recessed housing.
3
Connecting the cables
□ Plug the cable connector on the socket
adapter (B) into the connector on the LED light
module (A).
4
Pushing the LED light module
into the recessed can
□ Carefully push the LED light module (A) into
the recessed can housing until the trim is flush
with the ceiling surface.
B
A
B
A