Instructions / Assembly

8
Troubleshooting
WARNING: Before doing any work on the fixture, disconnect power to the light fixture by turning the breaker off
or removing the fuse from the fuse box.
Minor problems often can be fixed without the help of an electrician.
Problem Possible Cause Corrective Action
The fixture will not light. The power is off. Ensure the power supply is on.
The circuit breaker is off. Ensure the circuit breaker is in the on position.
There is a bad connection. Check to ensure proper wire connections are
made. Contact a qualified electrician.
There is a defective switch. Contact a qualified electrician.
The fuse blows or the
circuit breaker trips when
the light is turned on.
The wires are crossed or the
power wire is grounding out.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
Care & Cleaning
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or
removing the fuse from the fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
Light Distribution
ANGLE: 25° ANGLE: 75°
30
60
90
120
150
-/+180
-150
-120
-90
-60
-30
0
500
1000
1500
2000
2500
30
90
120
150
-/+180
-150
-120
-90
-60
-30
0
90
180
270
360
450