Instructions / Assembly

4
DD
ADDITIONAL PARTS AVAILABLE TO PURCHASE
NOTE: Separate parts not shown to actual size. Visit www.HomeDepot.com for more information and to purchase.
Part Description Quantity SKU
CC Electrical Box Plate (4 in.) 1
1001471759*
DD Plate Screws 2
* Required for Surface Mounting
CC
1
Separating the lens cover from the fixture body
□ Press the fixture body (B) inward, in the direction of the arrows, and remove the lens cover (A) with the other hand, as indicated.
B
A
WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off
the circuit breaker before removing an existing light fixture or installing the new one.
With power disconnected to the electrical box, remove the existing fixture. Make a sketch of how the current fixture is wired (by wire color)
or mark the wires with masking tape and a pencil so you will know how to properly reconnect the wires to the new LED light fixture.
NOTE: Separate mounting hardware (not included) not shown to actual size.
Pre-Installation (continued)
Installation