Manualshelf

Instructions / Assembly

ManualsBrandsCommercial Electric ManualsCommercial Lighting2 ft. 17-Watt Equivalent Integrated LED White Strip Light Linkable Plug-in/Direct Wire 900 Lumens Multi Color Changing
12345678910
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
1
Separating the lens cover from the fixture body
□ Press the sides of the fixture body (B) inward, in the direction of the arrows, and remove the lens cover (A) with the other hand.
B
A
B
A
2
Preparing the fixture for installation
□ After separating the lens cover (A) from the fixture body (B), unplug the wire connector to disconnect the
terminal wires.
With power disconnected to the electrical box, remove the existing fixture. Make a sketch of how the current fixture is wired (by wire color)
or mark the wires with masking tape and a pencil so you will know how to properly reconnect the wires to the new LED light fixture.
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture before drilling, based on
the type of ceiling.
WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off
the circuit breaker before removing an existing light fixture or installing the new one.
Wire Connector
Surface Mounting
Installation