Instructions / Assembly

9 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Mounting to drywall

□ Drill two holes large enough to clear the closed ﬂaps of

the butterﬂy nut on the toggle bolt (not included). Make

sure to fasten the toggle bolt into the butterﬂy nut

before inserting the ﬂaps into the ceiling.

□ Tighten the toggle bolt.

NOTE: Separate mounting hardware (not included) not shown to actual size.

NOTE: When determining the desired location for suspension mounting the light ﬁxture using the plug-in installation method, make sure the

light ﬁxture is located directly below the electrical outlet and that the distance between the electrical outlet and the end of the light ﬁxture is

less than 5 ft.

NOTE: If using eye hooks in the ceiling instead, attach the

chain with S hooks.

Mounting to wood

□ Drill two 1/16 in. diameter holes in the ceiling to

accommodate hook screws (not included). Make sure to

fasten the combo wood-machine end into the metal hook.

□ Tighten the hook screws (not included) into the wood.

NOTE: If using eye hooks in the ceiling instead, attach

the chain with S hooks.

For mounting to drywall:

Toggle bolt x 2

Part Description Quantity

Toggle Bolts Consisting of a No. 10-24 bolt 2-7/8 inches long with two

tapered wings 1 by 5/16 inch.

Studs Measuring 1-3/4 inches overall and having 1-1/4 inches of

wood screw threads on one end and at least six No. 10-24

machine screw threads on the other end.

Metal Hooks With a No. 10-24 threaded hole that engages the bolt threads. 2

For mounting to wood:

Hook screw x 2

NOTE: Eye hooks can be used as an alternate method of attaching the ﬁxture to the ceiling.

Suspension Mounting