Item # 1008000425 Model # 568061410 Use and Care Guide Prismatic Commercial LED WRAP LIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.Com THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................2 Safety Information.....................................2 Warranty....................................................2 Pre-Installation..........................................3 Planning Installation...............................3 Tools Required........................................3 Package Contents...................................3 Hardware Included..................................3 Installation............................
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. NOTE: Keep your receipt and these instructions for proof of purchase.
Installation Select a suitable location that can support the weight of the fixture. Determine the method of mounting before drilling. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one. With power disconnected to your electrical box, remove the existing fixture.
Installation (continued) 4 Feeding the wires and making the electrical connections NOTE: Put the gasket (BB) on any knock out hole on the fixture to better protect the wires. □□ Feed the electrical connection wires through any knock out hole, through the gasket (BB), and then through the mounting bracket (AA). □□ Insert the hot and neutral (black and white) wires from the electrical box into the wire connectors of the same color wires from the housing (A).
Installation (continued) 6 Attaching the diffuser to the housing □□ Reconnect the terminal ground wire (D) from the wire way cover (C) to the fixture housing (A). □□ Reattach the wire way cover (C) to the wrap light housing (A) by squeezing the wire way cover (C) and inserting the tabs into the openings in the housing (A). NOTE: If electrical connections are inside the wrap light housing (A), ensure the wire connections are covered by the wire way cover (C).
Row/Continuous Mounting 1 Remove knock out on fixture end cap Knock out hole A 2 Prepare one 7/8 in outer diameter fitting (not included, choose one as per necessary) to put it between the fixtures, like the below figure.
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □□ Clean the fixture with a soft, dry cloth. □□ Do not use cleaners with chemicals, solvents, or harsh abrasives. □□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Note 9 HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Artículo # 1008000425 Modelo # 568061410 MANUAL DE USO Y CUIDADO LÁMPARA LED ENVOLVENTE COMERCIAL PRISMÁTICA ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.
Contenido Contenido.................................................12 Información sobre seguridad..................12 Garantía...................................................12 Previo a la instalación.............................13 Planificación de la instalación..............13 Herramientas necesarias......................13 Contenido del paquete..........................13 Piezas Incluidas....................................13 Installation...............................................
Previo a la instalación Planificación de la instalación Antes de comenzar el armado, instalación u operación del producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si alguna de las piezas faltara o estuviera dañada, no proceda a armar, instalar u operar el producto. Comuníquese con el servicio al cliente para consultar por las piezas de reemplazo. NOTA: Guarde el recibo de compra y estas instrucciones como prueba de compra.
Instalación Seleccione un sitio adecuado que soporte el peso del aparato de iluminación. Determine el método de montaja antes de hacer los orificios. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Asegúrese de cortar el suministro eléctrico en los cables con los que trabajará. Extraiga los fusibles o apague el cortacircuitos antes de quitar el aparato de iluminación existente o instalar uno nuevo. Antes de retirar el aparato existente, desconecte la energía hacia la caja eléctrica.
Instalación (continuido) 4 Pasar los cables y hacer las conexiones eléctricas NOTA: Coloque la junta (BB) en uno de los agujeros ciegos de la lámpara para proteger mejor los cables. □□ Pase los cables eléctricas a través de cualquier agujero ciego y luego a través de la junta (BB), y luego a través de soporte de montaje (AA). □□ Inserte los cables vivo y neutro (negro y blanco) de la caja eléctrica en los conectores de los cables a los cables del mismo color de la caja eléctrica (A).
Instalación (continuido) 6 Unir el difusor a la caja □□ Vuelva a conectar el cable de tierra del terminal (D) desde la canaleta (C) a la caja de la lámpara (A). □□ Vuelva a colocar la canaleta de cables (C) en la caja de la lámpara envolvente (A) apretando la canaleta de cables (C) e insertando las pestañas en las aberturas de la caja (A). NOTA: Si las conexiones eléctricas están dentro de la lámpara envolvente (A), asegúrese de que las conexiones de los cables estén cubiertas por la canaleta (C).
Montaje en fila/continuo 1 Abra el agujero ciego en la tapa del extremo de la lámpara. Agujero alargado A uno conector de 7/8 pulg. de diámetro exterior (no incluido, 2 Prepare elija uno según sea necesario) para colocarlo entre las lámparas, como se muestra en la siguiente ilustración.
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar la lámpara, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. □□ Limpie el aparato con un paño suave y seco. □□ No utilice limpiadores con productos químicos, solventes o abrasivos. □□ No use limpiador líquido en las bombillas LED, en la unidad LED ni en los cables que están dentro de la lámpara.
HOMEDEPOT.COM Comuníquese al 1-877-527-0313 para solicitar asistencia.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.