Instructions / Assembly
4
5-6 In. Recessed Can Installation
6
Installing the fixture
□ Insert the torsion springs into the fixture housing brackets.
□ When installing trim into a 5 in. recessed housing, the torsion
spring (FF) must be moved. Unscrew the torsion spring (FF) from
the 6 in. position and move it to the 5 in. position (See Fig. 4).
□ Gently push the fixture into the recessed housing (See Fig. 5).
1
Turning Off the Power
2
Choosing a color temperature
before installing
□ Turn the power OFF at the switch and
fusebox or the circuit breaker.
□ Remove the existing trim installed in the
recessed housing.
□ Use the slide switch to choose a color
temperature before installing. Soft White
(SW), Bright White (BW), Daylight (DL) or
choose to adjust the color temperature
from the wall switch (SWITCH) (See Fig. 1).
□ Install the E26 adapter (DD) into the socket (See Fig. 2).
3
Installing the adapter
□ Connect the two terminals together (See Fig. 3).
4
Connecting the terminals
5
Adjusting the torsion springs
Soft White
3000K
Bright White
4000K
Daylight
5000K
Switch*
Fig. 1
Connect the orange connectors
5”
6”
Move the torsion spring from the 6 in.
position to the 5 in. position
FF
Fig. 3
Fig. 4
Fig. 5
Fig. 2