Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
J-Box Installation
□ Use the slide switch to choose a color
temperature before installing. Soft White (SW),
Bright White (BW), Daylight (DL) or choose to
adjust the color temperature from the wall
switch (SWITCH) (See Fig. 5).
Soft White
3000K
Bright White
4000K
Daylight
5000K
Switch*
Fig. 5
1
Turning Off the Power
2
Disconnecting and removing
components
3
Identifying the wires
4
Choosing a color temperature
before installing
□ Turn the power OFF at the switch and fusebox or the circuit
breaker.
□ Remove the existing trim installed in the recessed housing.
□ Disconnect the E26 adapter (DD) (See Fig. 1).
□ Remove the mounting bracket (BB) from the fixture (AA)
(See Fig. 2).
□ Remove the 5/6 in. torsion brackets (CC) from the
mounting bracket (BB) (See Fig. 3).
□ Identify the wiring: (black - line voltage, white - neutral
and green - ground)
□ Connect the green ground wire (GG) to the mounting
plate (BB). Use the wire nuts (JJ) to connect the
stripped wires of the male connector (EE) to the two
wires coming from the J-box (black - line voltage, white
- neutral). Connect the ground wire in the J-box to the
green wire on the mounting plate (BB). See figure 4.
EE
BB
JJ
GG
Fig. 1
DD
Fig. 3
CC
AA
BB
Fig. 2
DD
BB