Instructions / Assembly

4
Installation
1
Turning off the power
□ Place the wall switch to the OFF position.
□ Turn off the main power at the breaker panel or remove the
fuse from the fuse box.
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
2
Preparing the installation location
□ Use the template (D) to mark the desired installation
location.
□ Use a drywall saw to cut the opening marked by the
template (D).
D
3
Connecting the wires
□ Remove knockout on side of junction box and secure wire
with cable clamp (not included).
□ Connect the neutral wires (white) from the electrical box
(1) to the neutral wires from the supply circuit, the hot (live)
wires (black) from the electrical box (1) to the hot wires
from the supply circuit, and the ground wire (bare) from the
electrical box (1) to the ground wire from the supply circuit.
□ Secure all connections together with wire connectors (E)
and wrap electrical tape (not included) around the wire
connectors.
□ Push all excess wire and wire connections back into the
electrical box (1).
1
E