Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
4
Inserting the housing can
□ Lift the housing can (A) through the opening in the drywall.
A
5
Adjusting the can position
□ Use your hand to push and click the clips (2) in place.
Adjust the height where needed for a better t.
2
6
Installing the bulb into the trim
WARNING: Maximum bulb wattage for IC applications is
6.5W. Maximum wattage is 50W GU10 for a halogen bulb,
non-IC rated. Do not exceed the maximum wattage.
□ Insert the bulb (C) into the back of the trim (B) and secure
in place using the spring clips on the trim (B).
SPECIAL NOTE ON NON-IC INSTALLATIONS
If you choose to use a MAX 50W GU10 bulb (not included)
for this installation, all insulation MUST remain at least 3 in.
(7.6 cm) away from the housing can at all times
3 in.
(7.6 cm)
3 in.
(7.6 cm)
B
C