Instructions / Assembly

6
Installation (continued)
7
Installing the trim into the housing
□ Connect the base of the bulb (C) into the socket attached
to the recessed housing and push the trim (B) up into the
recessed housing.
C
B
Care and Cleaning
□ To clean the xture, rst disconnect the power to the xture by turning off the circuit breaker of by removing the fuse at the fuse box.
□ Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the interior and exterior surfaces of the
xture.
□ Allow the xture to dry completely before power is restored.