Use and Care Manual

3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
EE Wire Nuts 5
EE
Power Drill
0-10V Dimming Schematic
WARNING: Refer to Local and National Electrical codes
for correctly sizing wire gauge and making the proper
electrical connections and ground connections to prevent
electrical shock and risk of fire. Installation requires
knowledge of luminaires and electrical systems. If not
qualified, do not attempt installation. Contact a qualified
licensed electrician, to ensure wiring is correct and in
compliance of local codes.
gray
0-10 Volt Dimmer
(Supplied by others)
Lighting Fixture,
0-10v dimming LED
Driver
Lighting Fixture,
0-10v dimming LED
Driver
gray
purple
purple
Ground-green
Ground-green
Ground-green
Neutral
N
white
black
gray
purple
N
white
black
Line Black
Red/white
Red
REMARK: Please reference the dimmers manufacturer wiring diagrams for correct wiring of 0-10 Volt Dimmer.
Safety
goggles
Ladder
Electrical
tape
Flathead
screwdriver
Wire
cutters
Wire
strippers
Hammer
Before You Begin
1. Turn off the electricity at the circuit breaker or fuse box.
2. Choose your installation option:
• Installation Option 1 – Recessed Mount
• Installation Option 2 – Surface Mount Kit (Sold Separately)
• Installation Option 3 – Pendant/Suspension Mount Kit (Sold Separately)
Phillips
screwdriver