Instructions / Assembly

Installation
Installation
Part Description
Frame
Glass shade
Fixture body
B
C
D
E
A
Junction box
Set screw
Hardware not shown to actual size.
HARDWARE INCLUDED
4
Installing the junction box to ceiling
5
Making the electrical connections and
attaching the xture body to the ceiling
Safety Information
PACKAGE CONTENTS
Pre-Installation
Pre-Installation
BB
C
Screw
Key hole
Quantity
1
1
1
1
1
NOTE:
Make sure the power is off.
Drill the mounting hole on the desired mounting
surface and push the anchors (CC) into the holes.
□
□
Pull the supply wires down out of the surface
and through the wire hole of junction box (A).
□
□
Fasten the junction box (A) to the mounting surface
with the mounting screws (AA).
□
□
□
□
Wrap electrical tape (not included) around the wire
connectors (BB), and ensure they are secure.
IMPORTANT SAFETY INSTRUCTIONS
(Save These Instructions)
Care and Cleaning
□
removing the fuse at the fuse box.
□
□
CAUTION: Do not use chemical solvents or harsh
may occur.
Use a dry or slightly dampened, clean cloth (use clean water, never use a solvent) to wipe the
interior and exterior surfaces of the xture.
BB
Wire connectors
Anchors
x 3
x 2
to the negative wires from the supply circuit, the positive
from the supply circuit, and the ground wire from
using the wire connectors (BB).
Connect the wires as shown in the diagrams according
to the desired mounting method.
C
A
A
C
A
A
AA
CC
E
B
B
D
□
Raise the xture body (B) up to the junction box (A).
□
Aim the key hole of the xture body (C) to the screws of the
junction box (A) and rotate counter-clockwise until it is in
place and secure it using the screwdriver.
Moisture barrier pad
x 1
DD
CC
DD
3
Installation
Installation
1
Disassembling the xture body
□
Loosen the set screws (B) with the screwdriver and
separate the frame (D) and the glass shade (E) from
the xture body (C).
7
Assembling the xture body
□
Secure the glass shade (E) to the xture body (C), then attach the
frame (D) to the xture body (C) and tighten with the set screw (B).
2
Disassembling the junction box
□
Loosen the screws in the xture body (C) with the
screwdriver and separate xture body (C) and
junction box (A).
Waterproof silicon
Also suggest adding waterproong to any and all exposed
gaps or openings for added protection.
Mounting surface
Canopy
8
Waterproong the xture (optional)
□
□
To prevent water or moisture from entering the xture
between the canopy and mounting surface, waterproof
silicon, caulk or grease should be applied to seal any
gaps around the junction point.
□
□
Read all instructions prior to beginning the
installation process.
Make sure the power is turned off at the
electrical panel box before beginning your
installation. Turning the power off at the wall
shock.
□
All electrical connections must be in accordance
with local codes and the National Electrical Code.
If you are unfamiliar with methods of installing
licensed electrician.
CAUTION:
Keep the lamp away from
materials that may burn.
WARNING: This lighting is suitable for wet
locations.
CAUTION:
Covered ceiling mount only.
Installing the moisture barrier pad
Place and stick the moisture barrier pad (DD) on
the back of the canopy (A).
TOOLS REQUIRED
Ladder Gloves
Safety
goggles
Electrical
tape
Wirestripper
Electric
drill
5/16 in.
Drill bit
Pencil
Phillips
screwdriver
AA
Mounting screws
x 2
B
C
D
E
A
USE AND CARE GUIDE
LIGHT FIXTURE
Item #1003934460
Model #EW10500GY
THANK YOU
We appreciate the trust and condence you have placed in Commercial Electric through the purchase of this light
xture. We strive to continually create quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Warranty
1-YEAR LIMITED WARRANTY
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
Questions, problems, missing parts? Before returning to store,
HOMEDEPOT.COM
Contact the Customer Service Team at 1-877-527-0313 or visit www.homedepot.com.
call Commerial Electric Customer Service
Retain this manual for future use.
The manufacturer warrants this lighting xture against defects in materials and workmanship for a period
of one year from the date of purchase. If within this period the product is found to be defective in material
or workmanship, the product must be returned, with a copy of the bill of sale as proof of purchase, to the
original place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase
price to the original purchaser or consumer. This warranty does not cover light bulbs or the xture
becoming damaged due to misuse, accidental damage, improper handling and/or installation, and
specically excludes liability for direct, incidental, or consequential damages. As some states do not allow
exclusions or limitations on an implied warranty, so the above exclusions and limitations may not apply.
This warranty gives you specic rights and you may also have other rights that vary from state to state.
CAUTION: Turn off/unplug the light and
allow it to cool before replacing the bulb.
CAUTION: Refer to the re-lamping label located on
6
Installing the bulb
□
Install the light bulb (sold separately).
C
E
D
Troubleshooting
Problem Possible Cause Solution
The light bulb will not
illuminate.
The light bulb is burned
out.
Replace the light bulb.
The power is off.
Make sure the power supply is on.
There is a faulty wire
connection.
Check the wiring.
Contact a quali
ed and licensed
electrician if you are not comfortable
troubleshooting wiring problems.
There is a faulty switch.
Test or replace the switch.
There are crossed wires,
or the power wire is not
properly grounded.
Check the wire connections.
The fuse blows or the circuit
breaker trips when the light bulb
is illuminated.