Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
8
Connecting the Swing Arms
9
Attaching the Panel Light
□ Insert the swing arm’s key hole slot into the
mounting bracket plate’s hanging screw.
□ Feed the junction box and fixture wires through
the mounting bracket plate’s center hole.
□ Raise the fixture to the direction of the arrow on
the swing arm.
10
Securing the Panel Light
□ Once the fixture has been raised and is flush to the
ceiling, lock the fixture by moving it towards the
opposite direction it was raised.
Changing Color Settings
1. You can lock in one color temperature, change among
multiple color temperatures, dimm from 10%-100%,
memorize the last color temperature, and reset
automatically.
2. Soft White - Bright White - Daylight - Light Switch
Marks on the lamp: SW-BW-DL-Switch
3. When the slide switch is set to SW (Soft White), the
color temperature fixes at 3000K.
4. When the slide switch is set to BW (Bright White), the
color temperature fixes at 4000K.
5. When the slide switch is set to DL (Daylight), the color
temperature fixes at 5000K.
6. When the slide switch is set to SWITCH, the color
temperature can be changed from SW-BW-DL with your
existing light switch.
7. To change color temperatures using your existing light switch:
A. Set the slide switch on the back of the fixture to “SWITCH”.
B. Toggle your light switch ON and OFF within 0.5-3 seconds to
cycle though the three different color temperatures.
C. If the fixture is left ON for over 20 seconds then turned
OFF, the fixture will remember the last color temperature
selected and will display that color when turned on again.
8. The reset function is used when using multiple Color
Selectable lighting products operating from the same light
switch. In the event multiple fixtures are not displaying the
same color at the same time, fixtures must be RESET using
your existing light switch. Simply toggle the wall switch ON
and OFF 7 times within 10 seconds. (ex: Fixture in the ON
position, toggle the wall switch ON and OFF in about 1 to 1.5
seconds. Repeat 7 times.)
(Soft White)
SW
(Bright White)
BW
(Daylight)
DL
(Light Switch)
Switch