Installation Guide
8 in. LED TRIMLESS DISK LIGHT
2
Table of Contents
Table of Contents......................................2
Safety Information....................................2
Warranty ...................................................3
Pre-Installation.........................................3
Planning Installation ..............................3
Tools Required .......................................3
Package Contents..................................4
Recessed Can Installation
5
Junction Box Installation .......................
................
5
Installation................................................4
Care & Cleaning ........................................8
Troubleshooting ........................................8
Light Distribution......................................9
Compatibility.............................................9
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED
light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Item # 1004 330 905
Model # ND02aA16IR1-259
Safety Information
CAUTION:
Risk of electrical shock. Do not open.
There are no user serviceable parts inside. Turn
the power off before inspection, installation, or
removal. The lamp is suitable for use in wet
locations. Use only on 120 VAC, 60 HZ circuits.
NOTICE:
Each light shall be installed only in its intended
manner and orientation. Not all existing recessed cans
that meet these requirements will be compatible with
Commercial Electric recessed LED Trim. To ensure
compatibility, a test installation should be conducted.
The minimum starting temperature is -4 °F.
WARNING: Carefully read and understand the
information given in this manual before beginning
the assembly and installation. Failure to do so
could lead to electric shock, fire, or other injuries
which could be hazardous or even fatal.
WARNING: Ensure the electricity to the wires
you are working on is shut off. Either remove the
fuse or turn off the circuit breaker.
WARNING: Risk of fire or electric shock.
Installation of this LED Retrofit Kit assembly
requires a person familiar with the construction
and operation of the light fixture’s/luminaire’s
electrical system and the hazard involved. If not
qualified,do not attempt installation. Contact a
qualified electrician.
WARNING: Install this kit only in luminaires
(light fixtures) that have the construction features
and dimensions shown in the photographs and/or
drawings included in these installation instructions,
and where the input rating of the retrofit kit does
not exceed the input rating of the luminaire.
WARNING:
Not intended for use with emergency
exit xtures or emergency exit lights. Suitable for
wet locations.
CAUTION: Any changes or modications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
WARNING:
Do not make or alter any open holes
in an enclosure of wiring or electrical components
during kit installation.
WARNING: To prevent wiring damage or
abrasion, DO NOT expose the wiring to sheet
metal edges or other sharp objects.
NOTICE:
This device complies with part 15 of the FCC Rules.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.These limits are designed to provide
reasonable protection against harm-ful interference in a
residential installation.This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received,
including interference that may cause undesired operation.
□ Reorient or relocate the receiving antenna
□
□
□
Increase the separation between the equipment and
the receiver.
□ Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
□ Consult the dealer or an experienced radio/TV
technician for help.