Installation Guide

9 HOMEDEPOT.COM
Please contact 1-844-548-3776 for further assistance.
Installation (continued)
6
Securing the light xture on the
mounting base and caulking
□ Close the xture by tightening the two mounting base
screws (C), using a Phillips screwdriver.
□ Caulk around the mounting base (D) and surface with
silicone sealant (not included).
NOTICE: Failure to properly caulk around the surface and mounting
base (D) could lead to water damage and is not covered under warranty.
NOTE: When attaching this xture (A) to an external surface
mount junction box, caulk the inside of the light xture before
attaching to the mounting base (D).
C
D
Operation
TURNING LIGHTS ON/OFF
Switch controlled
Switch controlled operation enables the light xture to turn ON and
OFF by ipping a switch that controls the electricity to the outlet
powering the xture. The light xture will not turn ON and OFF
automatically, but is manually controlled.