SDS

Reference No: WTX21D11126382B003 Page 4 of 7
Waltek Testing Group Co., Ltd.
http://www.waltek.com.cn
Section 6 – Accidental Release Measures
Personal
precautions
Attention! Corrosive material. Avoid contact with skin, eyes or clothing. Ensure
adequate ventilation. Use personal protective equipment as required. Evacuate
personnel
to
safe
areas.
Keep
people
away
from
and
upwind
of
spill/leak.
Other
Information
Refer to protective measures listed in section 7 and 8.
Environmental
precautions
Refer to protective measures listed in Section 7 and 8. Prevent further leakage or
spillage if safe to do so. Should not be released into the environment. Do not allow to
enter into soil/subsoil. Prevent product from entering drains.
Methods for
containment
Prevent further leakage or spillage if safe to do so.
Methods for
cleaning up
Pick up and transfer to properly labeled containers.
Section 7 – Handing and storage
Handing: Before handling the batteries, the users should read the product specification
carefully. Do not crush, pierce the battery terminals with conductive goods. Not
directly heat or solder. Do not throw in fire. Do not mix batteries of different types.
Do not mix new and used batteries. Keep batteries in non-conductive trays
Storage: Store batteries in cool and ventilated area away from sources of heat, open
flames, corrosive chemicals, food and drink. Since short circuit can cause burn,
leakage and rupture, keep batteries in original packaging until use and do not jumble
them. Keep away form children
Section 8 – Exposure controls, Personal Protection
Maximum
admissible
co
n
c
e
nt
r
ation:
No information is available
Monitoring
M
et
h
od:
Use ventilation or other monitoring devices to control temperature, humidity and fumes
Engineering
Cont
r
ol:
Use ventilation or other monitoring devices to control temperature, humidity and fumes
Respiratory
Pr
o
t
e
c
tio
n
:
Not necessary under normal use. In case of battery rupture, use self-contained
resp
i
rat
o
r
y
e
q
u
i
p
m
e
nt
Eyes/face
Pr
ot
e
ction:
Not necessary under normal use. Wear safety goggles if handing a leaking or
ruptured batteries
Skin and Body
p
r
o
t
e
c
tio
n
:
Not necessary under normal use. Use rubber apron and protective clothes in
case of handing a leaking or ruptured batteries
Hands
Pr
ote
c
tio
n
:
Not necessary under normal use. Use rubber gloves if handing a leaking or
ruptured batteries
Hygiene
Measures:
Handle in accordance with good industrial hygiene and safety practice. Avoid
contact with skin, eyes or clothing. Wear suitable gloves and eye/face protection.
Do not eat, drink or smoke when using this product. Take off contaminated clothing
and wash before reuse. Contaminate work clothing should not be allowed out of the
workplace. Regular cleaning of equipment, work area and clothing is
recommended. Wash hands before breaks and immediately after handling the
product. For environmental protection, remove and wash all contaminated
protective equipment before re-use.
Other
Protections:
None