Installation Guide

6
Installation
1
Identifying the bolt diameter to use
To ensure proper mounting of the brackets to your TV, this
mounting system includes several sizes of bolts (CC - JJ), washers
(OO and PP), and spacers (KK - NN) that can be used in various
combinations. Combinations are determined by the back style of
the TV (at, curved, or recessed) and the diameter and depth of
those holes.
□ Select the bolt (CC - JJ) diameter to use by inserting the
various sized bolts (CC - JJ) (M4, M5, M6, and M8) into the
mounting holes in the back of your TV.
M5 M6 M8M4
OR OR OR
2
Identifying the bolt length to use
□ Insert a straw or toothpick into one of the mounting holes
on the back of your TV. If your TV is curved or recessed,
place the proper sized spacer (KK, LL, MM or NN) on top of
one of the mounting holes rst.
□ Use a pencil to mark the depth of the mounting hole.
□ Determine the proper bolt length to use by comparing the
mark with the various bolts provided.
CAUTION: When the bolt is longer than the mark, choose
a shorter bolt.
FLAT
CURVED
RECESSED
3
Marking the mounting holes
□ Use the holes in the wall plate unit (A) as a template to
mark the mounting hole locations for attaching the wall
plate unit (A) to the wall.
□ Use the bubble level (C) to ensure the mount will be level
before you drill holes.
A
C