Data Collector
Thank you for choosing the R60 Data Collector. This Quick Guide will provide useful information about R60. It will also guide you through your first step of using R60 Data Collector. The R60 is designed to withstand the rough environment that typically occurs in the field. However, the R60 is high-precision electronic equipment and should be treated with reasonable care.
App shortcut Quick launch software Survey button 1）Enter button 2）Measure a point in the software Camera Mic 2 Speaker Flash lamp Card cover NFC Wristbands Install SIM/UIM card and TF card This machine uses Nano SIM/UIM card. First unscrew the screws on the card cover. Insert SIM/UIM card in the lower card slot and TF Card in the upper card slot.
Screw Waterproof sealing ring Remove SIM / UIM card and TF card 1）First take out the TF card on the upper layer 2）Move the paddle as shown in the figure below to take out the SIM card
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
