64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Second Edition (July 2000) Part Number 154060-002 Compaq Computer Corporation Compaq Confidential – Need to Know Required Writer: John Turner Project: Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Comments: Part Number: 154060-002 File Name: a-frnt.
Notice © 2000 Compaq Computer Corporation Compaq, Compaq Insight Manager, ROMPaq, QVision, SmartStart, registered United States Patent and Trademark Office. SoftPaq is a trademark of Compaq Information Technologies Group, L.P. Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation. All other product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.
Contents About This Guide Text Conventions........................................................................................................vi Symbols in Text.........................................................................................................vii Symbols on Equipment..............................................................................................vii Getting Help ...........................................................................................................
iv Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installing the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter continued Cabling the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter ................ 2-3 External SCSI Connections............................................................................... 2-3 Internal SCSI Connections................................................................................ 2-4 Completing the Installation..........................
About This Guide This guide is designed to be used as step-by-step instructions for installation and upgrades to the Compaq StorageWorks 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attempt to install this equipment. Consult the Safety Information and user documentation provided with your computer before attempting this installation.
vi Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Text Conventions This document uses the following conventions to distinguish elements of text: Keys Keys appear in boldface. A plus sign (+) between two keys indicates that they should be pressed simultaneously. USER INPUT User input appears in a different typeface and in uppercase. FILENAMES File names appear in uppercase italics. Menu Options, Command Names, Dialog Box Names These elements appear in initial capital letters.
About This Guide Symbols in Text These symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. IMPORTANT: Text set off in this manner presents clarifying information or specific instructions.
viii Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists. WARNING: To reduce the risk of injury from a hot component, allow the surface to cool before touching. Power Supplies or Systems marked with these symbols indicate the equipment is supplied by multiple sources of power.
About This Guide Be sure to have the following information available before you call Compaq: ■ Technical support registration number (if applicable) ■ Product serial number (s) ■ Product model name(s) and numbers(s) ■ Applicable error messages ■ Add-on boards or hardware ■ Third-party hardware or software ■ Operating system type and revision level ■ Detailed, specific questions Compaq Website The Compaq website has information on this product as well as the latest drivers and Flash ROM imag
Chapter 1 Introduction TM The Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter contains one low voltage differential (LVD) SCSI channel that interfaces directly between the server Peripheral Component Interface (PCI) Local Bus and up to 15 SCSI devices. The adapter supports industry-standard interfaces and protocols.
1-2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide ■ Contains one 68-pin wide SCSI external connector that supports Wide Ultra3 SCSI, Wide Ultra2 SCSI, Wide-Ultra SCSI-3, and Fast-Wide SCSI-2 ■ Contains one 50-pin narrow SCSI internal connector to support legacy devices Wide Ultra3 SCSI Support The 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter provides 64-Bit PCI bus master operation and SCSI data transfer rates of up to 160 MB/s, provided that all components a
Introduction SCSI Connectors The 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter has the following connectors: 2 3 1 4 6 5 Figure 1-1.
1-4 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide SCSI IDs The 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter contains one SCSI bus that support up to 15 peripherals. The SCSI bus has internal and external connectors. Peripherals on the bus must have a unique SCSI ID ranging from 6 to 0, then 15 to 8, with 6 being the highest priority and 8 being the lowest priority.
Introduction CAUTION: To prevent boot error messages, the integrated SCSI controller on the system board of the server must be terminated at all times. If you are using the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter to replace the integrated controller, you should leave a terminated SCSI ribbon cable connected to the system board, even if there are no SCSI devices attached to this cable. SCSI Cables Cables are provided with most Compaq server products that require cabling.
1-6 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide SCSI Cable Connectors To identify the various SCSI cables required 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter installation in the various configurations of Compaq servers, see Figure 1-2. Keep these characteristics of SCSI cables in mind: ■ External standard Wide SCSI cables have a round wire with securable connectors, and the connector heads are smaller than 68-pin external wide SCSI connector heads.
Chapter 2 Installing the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter This chapter discusses the installation of the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter in a Compaq server. WARNING: To reduce the risk of personal injury from electrical shock and hazardous energy levels, only authorized service technicians should attempt to install this equipment. Consult the Safety Information and user documentation provided with your computer before attempting this installation.
2-2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Preparing the Server Use the following general guidelines to prepare the server for installation of the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter. WARNING: When working with equipment installed in a rack, be sure that the equipment/rack is stable before beginning. To prepare the server: 1. Perform a normal system shutdown. 2. Turn OFF the server. 3. Turn OFF all peripheral devices attached to the server. 4.
Installing the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter 6. Locate the PCI bus expansion slots. Refer to the documentation that came with your server for the specific location of these slots. 7. Depending on your server model, remove the retaining screw or open the expansion slot latches that secure the PCI slots. 8. Remove the slot cover from the PCI slot. (You may want to save this protective cover to use if the slot becomes empty again.) 9.
2-4 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Figure 2-1. External SCSI cabling on a Compaq server To connect to a wide Ultra3 SCSI peripheral, use a standard Wide SCSI-Wide SCSI cable. If this cable is not furnished with your Compaq external SCSI device, it can be obtained from your local Compaq Reseller. See “SCSI Cables” in Chapter 1 for information on ordering the correct cables. To attach the cable: 11.
Installing the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter CAUTION: If your server has an integrated Wide Ultra3 SCSI controller, the controller must be terminated at all times to prevent boot error messages.
2-6 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Replacing the Integrated SCSI Controller Use the following guidelines if you are replacing the integrated SCSI controller with the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter: 17. Unplug the original SCSI cable from the system board. 18. Plug the SCSI cable into the appropriate connector on the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter.
Installing the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter 3. Route the cable(s) according to the instructions in your server documentation. 4. Attach the cables to the new SCSI devices. Completing the Installation After all cabling and connections have been completed, reassemble the server by following these guidelines: 1. Be sure all cables are routed correctly and are not restricting or being pinched by other components.
Chapter 3 Installing the Firmware and Software This chapter outlines driver installation steps to set up the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter in a server running any of the following operating systems: ■ Microsoft Windows NT 3.51 and 4.0 ■ Microsoft Windows 2000 ■ SCO UnixWare 7.x ■ SCO OpenServer 5 ■ Novell NetWare 5.
3-2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Upgrading the System ROM System ROM can be upgraded by flashing the ROM using a special Compaq utility called System ROMPaq. This utility replaces the existing contents of the ROM with another version stored in a disk file. Use the information below to access and run System ROMPaq. ROMPaq Diskettes The ROMPaq utilities must be run from diskette.
Installing the Firmware and Software Running System ROMPaq System ROMPaq is used to update the firmware in Compaq servers. The 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter has enhanced capabilities, and many existing servers may not be able to take advantage of these capabilities without updated firmware.
3-4 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide If you have not yet installed your new 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter, you can do so at this time. See Chapter 2 for general hardware installation and cabling information, then proceed to the next section, “Installing the Drivers.
Installing the Firmware and Software Windows 2000 Use the following instructions to install the driver on a system already running Windows 2000. The driver file, named ADPU160M.SYS, is located on the Compaq SmartStart and Support Software CD supplied with your new 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter. 1. Start Windows 2000 on the system and log on to an account with administrative privileges. 2. Insert the Compaq SmartStart and Support Software CD into the CD drive. 3.
3-6 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide SCO UnixWare 7.x Use the following instructions to install the driver on a system already running UnixWare 7.xx. The driver file, named ADST70, is located on the UnixWare 7.xx EFS diskette containing HBA drivers. NOTE: Compaq Extended Feature Supplement (EFS) version 7.xx or later for SCO UnixWare 7.x is required for operation with the Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter. 1.
Installing the Firmware and Software Building the EFS Diskettes EFS diskettes can be built either from the Web or from a Compaq SmartStart and Support Software CD. ■ To build the diskettes from the Web, download the latest EFS for SCO OpenServer 5 from the site www.compaq.com/support/files/server/us/index.html ■ To build the diskettes from the SmartStart and Support Software CD: 1. Insert the Smart Start and Support Software CD (version 4.80 or later) into the CD drive.
3-8 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide 6. Press Tab to highlight the software selections, and use the arrow keys to highlight Compaq Extended Feature Supplement. Press Enter. 7. Press Tab to go back to the menu bar. Choose Software and press Enter. 8. Choose Remove Software and press Enter. 9. You are prompted to verify the removal of all packages. Choose Remove and press Enter. 10.
Installing the Firmware and Software 9. Insert diskette Volume 1 of the Compaq EFS for SCO OpenServer Release 5 into the diskette drive. 10. Choose Continue and press Enter. The initial EFS screen appears. Each component of the EFS is listed below the title as it is installed. 11. When prompted, enter the IP address, broadcast address, and network mask for each installed network controller. 12.
3-10 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide 3. Insert the SmartStart and Support Software CD into the CD drive. 4. Copy the following files from the subdirectory \CPQSUPSW\NSSD\NWPA into your NetWare directory: ADPT160.HAM ADPT160.DDI 5. Remove the CD and shutdown the system. 6. Install the Compaq 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter. 7. Power on the system and start NetWare 5.1.
Installing the Firmware and Software 4. Select Compaq OS/2 Support Software - 4.50A Or Later Version and move to the next screen. 5. Chose the option Create Software Diskettes To Floppy Only, then click through the following screens until a screen indicating Please Insert Diskette 4 Of 5… is displayed. 6. Insert a formatted 1.44 MB diskette into the diskette drive and click OK. The drivers related to the 64-Bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter Controller will be copied onto the diskette. 7.
Appendix A Regulatory Compliance Notices Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.
A-2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Class A Equipment This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Regulatory Compliance Notices Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions regarding this declaration, contact: Compaq Computer Corporation P. O.
A-4 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Canadian Notice (Avis Canadien) Class A Equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B Equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Regulatory Compliance Notices Japanese Notice Taiwanese Notice Compaq Confidential – Need to Know Required Writer: JTurner Project: Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Comments: Part Number: 154060-002 File Name: e-appa Regulatory Compliance Notices.
Appendix B Electrostatic Discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: ■ Avoid hand contact by transporting and storing products in static-safe containers.
B-2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide Grounding Methods There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: ■ Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ± 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.
Index A adding a separate SCSI bus 2-5 adding internal SCSI devices 2-6 attaching cables 2-4 B building diskettes EFS for OpenServer 5 3-6 EFS for UnixWare 7 3-6 C cables attaching 2-4 characteristics 1-6 identifying 1-6 option kit part numbers 1-5 ordering 1-5 terminating 1-4 cabling connectors 2-3 external connections 2-3 internal connections 2-4 Single Channel Wide Ultra3 SCSI Adapter 2-3 illustrated 2-4 cautions electrostatic discharge 2-2 grounding 2-2 terminating SCSI cables 1-5, 2-5 Compaq author
2 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide D H data transfer rates 1-1 defined Single Channel Wide Ultra3 SCSI Adapter 1-1 diskettes EFS, for OpenServer 5 3-6 EFS, for UnixWare 7 3-6 diskettes, creating ROMPaq 3-2 UnixWare 7.x drivers 3-6 driver installation UnixWare 7.
Index N S NetWare 5.1 drivers 3-9 SCO OpenServer 5 drivers 3-6 SCO UnixWare 7.
4 Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide T U tagged command queuing 1-2 Taiwanese notice A-5 technical support viii telephone numbers ix terminating, SCSI devices 1-4 text conventions vi UnixWare 7.x drivers 3-6 updating firmware 2-7 system ROM 2-7 W warnings electrical shock viii installation instructions 2-1 Windows 2000 drivers 3-5 Windows NT drivers 3-4 www.compaq.com.
