Installation guide

Compaq Confidential – Need to Know Required

Writer:

John Turner

Project:

Compaq 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter Installation Guide

Comments:

Part Number:

154060-002

File Name:

d-ch3 Installing Firmware and Software.doc

Last Saved On:

7/21/00 2:23 PM

Chapter

Installing the Firmware and Software

This chapter outlines driver installation steps to set up the Compaq

64-Bit/66 MHz Single Channel Wide Ultra3 SCSI Adapter in a server running

any of the following operating systems:

■

Microsoft Windows NT 3.51 and 4.0

■

Microsoft Windows 2000

■

SCO UnixWare 7.x

■

SCO OpenServer 5

■

Novell NetWare 5.1

■

IBM OS/2

After you install the 64-Bit/66 MHz Single Channel Wide Ultra3 SCSI

Adapter in your server, you must complete the installation by upgrading the

system ROM (if necessary) and installing the new drivers for your operating

system. Follow the procedures outlined in this chapter to guide you through

these important steps.