User's Manual

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
2. Remove the keyboard assembly (Section 3.7).
3. Unsnap the PC Card door [1] from the post and remove the door
(Figure 3-65).
4. Remove the spring [2] from the PC Card door (Figure 3-65).
To replace the top PC Card (PCMCIA) door and spring, follow these steps:
1. Install the PC Card spring on the door rib, making sure the bent arm of
the spring is placed against the rib on the PC Card door (Figure 3-66).