Specifications

Palm rest
Description Spare part number
Palm rest (includes TouchPad) 535775-001
Before removing the palm rest, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 42)
5. Remove the switch cover and keyboard (see
Switch cover and keyboard on page 43)
Remove the palm rest:
1. Remove the three Phillips PM2.0×3.0 broadhead screws (1) from the system board.
2. Slide the palm rest back (2), then lift and rotate the front edge until the palm rest rests on the
system board (3).
Component replacement procedures 51