Specifications

e.
Switch cover (see
Switch cover on page 74)
f. Fan (see
Fan on page 75)
g.
Heat sink (see
Heat sink on page 76)
h. Display assembly (see
Display assembly on page 80)
i. Top cover (see
Top cover on page 85)
j. System board (see
System board on page 92)
k. PC Card/audio board assembly (see
PC Card/audio board assembly on page 95)
Remove the modem module:
1. Turn the PC Card/audio board assembly upside down.
2.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the PC Card/
audio board assembly.
3. Lift the modem module (2) straight up and remove it.
Reverse this procedure to install the modem module.
98 Chapter 4 Removal and replacement procedures