User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
Removal and Replacement Procedures
Maintenance and Service Guide 5–25
4. Remove the following screws:
❏
One TM2.5 × 5.0 screw
1
next to the fan (Figure 5-20)
❏
Four spring-loaded TM2.5 × 14.0 shoulder screws
2
✎
The four spring-loaded shoulder screws should be removed and
installed in the “1,” “2,” “3,” “4” sequence stamped on the heat
spreader adjacent to each screwhole.
❏
One TM2.5 × 8.0 screw
3
next to the keyboard and
TouchPad ZIF connectors
Figure 5-20. Removing the Heat Spreader Screws
272638-001.book Page 25 Thursday, July 25, 2002 4:21 PM