User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
![](/manual/compaq/900/user-guide-english/images/img-111.png)
5–34 Maintenance and Service Guide
Removal and Replacement Procedures
11. If necessary, remove the display hinge covers by pressing up
on the bottom of the covers from behind the display assembly
(Figure 5-27). Note that the hinge covers are not
interchangeable.
Figure 5-27. Removing the Display Hinge Covers
✎
The display hinge covers are included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001.
272638-001.book Page 34 Thursday, July 25, 2002 4:21 PM