User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
6–2 Maintenance and Service Guide
Specifications
✎
Applicable product safety standards specify thermal limits for
plastic surfaces. The computer operates well within this range of
temperatures.
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 90%, 38.7° C (101.6° F) maximum wet bulb
temperature
Altitude (unpressurized)
Operating
Nonoperating
0 to 3,048 m
0 to 9,144 m
0 to 10,000 ft
0 to 30,000 ft
Shock
Operating
Nonoperating
10 G, 11 ms, half-sine
60 G, 11 ms, half-sine
Vibration
Operating
Nonoperating
0.5 G zero-to-peak, 10 to 500 Hz, 0.25 oct/min
sweep rate
1.0 G zero-to-peak, 10 to 500 Hz, 0.5 oct/min
sweep rate
Table 6-1
Notebook
(Continued)
272638-001.book Page 2 Thursday, July 25, 2002 4:21 PM