User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
C–10 Maintenance and Service Guide
Screw Listing
Figure C-9. TM2.5 × 8.0 Screw Locations
Table C-2
Torx T8 Metric 2.5 × 8.0 Screw
Color Qty Length Thread
Head
Width
Silver 11 8.0 mm 2.5 mm 4.0 mm
Where used:
1 One screw that secures the hard drive to the base enclosure
(documented in Section 5.3)
2 Two screws that secure the LED cover to the base enclosure
(documented in Section 5.9)
3 Five screws that secure the palm rest to the base enclosure
(documented in Section 5.14)
4 Two screws that secure the top cover to the base enclosure
(documented in Section 5.20)
272638-001.book Page 10 Thursday, July 25, 2002 4:21 PM