User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
![](/manual/compaq/900/user-guide-english/images/img-82.png)
Removal and Replacement Procedures
Maintenance and Service Guide 5–5
3. Remove the battery pack by following these steps:
a. Turn the computer bottom side up with the left side
facing forward.
b. Slide and hold the battery release latch
1
toward the back
of the computer (Figure 5-2).
c. Use the notch in the battery bay to slide the battery pack
out of the battery bay
2
.
d. Remove the battery pack.
Figure 5-2. Releasing the Battery Pack
Reverse the preceding procedures to install the battery pack.
Battery Packs
Spare Part Number Information
8 cell, 58 W hour, 3.6 Ah, Li ion 281766-001
272638-001.book Page 5 Thursday, July 25, 2002 4:21 PM