User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
5–6 Maintenance and Service Guide
Removal and Replacement Procedures
4. To remove the battery bezel, slide the bezel straight down
(Figure 5-3).
Figure 5-3. Removing the Battery Bezel
✎
Battery bezels are available with carbon finish for Evo Notebook
N1005 models and silver finish for Presario 900 models, and are
included in the Miscellaneous Plastics/Hardware Kit, spare part
number 285541-001.
Reverse the preceding procedures to install the battery bezel.
272638-001.book Page 6 Thursday, July 25, 2002 4:21 PM