User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
Removal and Replacement Procedures
Maintenance and Service Guide 5–7
5. Remove the optical drive by following these steps:
a. Turn the computer bottom side up with the left side
facing forward.
b. Remove the two TM2.5 × 5.0 screws that secure the
optical drive to the base enclosure (Figure 5-4).
Figure 5-4. Removing the Optical Drive Screws
Optical Drives
Spare Part Number Information
24X Max CD-ROM drive
16X Max CD-RW drive
8X Max DVD-ROM drive
8X Max DVD-ROM/CD-RW combination drive
285526-001
285528-001
285527-001
285529-001
272638-001.book Page 7 Thursday, July 25, 2002 4:21 PM