User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
5–12 Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Computer Feet
The computer feet are adhesive-backed rubber pads. The
computer feet are included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001. The
computer feet attach to the base enclosure as illustrated in
Figure 5-9.
Figure 5-9. Replacing the Computer Feet
5.5 Memory Expansion Board
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the front facing
forward.
Memory Expansion Boards
Spare Part Number Information
512 MB
256 MB
128 MB
285524-001
285523-001
285222-001
272638-001.book Page 12 Thursday, July 25, 2002 4:21 PM