User Guide
Table Of Contents
- Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- 5.1 Serial Number
- 5.2 Disassembly Sequence Chart
- 5.3 Preparing the Computer for Disassembly
- 5.4 Computer Feet
- 5.5 Memory Expansion Board
- 5.6 Mini PCI Communications Board
- 5.7 Disk Cell RTC Battery
- 5.8 Connector Cover
- 5.9 LED Cover
- 5.10 Keyboard
- 5.11 Heat Spreader
- 5.12 Processor
- 5.13 Display
- 5.14 Palm Rest
- 5.15 Diskette Drive
- 5.16 TouchPad Components
- 5.17 Display Release Assembly
- 5.18 Charger Board
- 5.19 Speaker Assembly
- 5.20 Top Cover
- 5.21 Fan
- 5.22 System Board
- 5.23 Modem Cable
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
Removal and Replacement Procedures
Maintenance and Service Guide 5–13
3. Remove the PM2.5 × 4.0 screw
1
that secures the memory
expansion compartment cover to the base enclosure
(Figure 5-10).
4. Slide the cover to the right
2
.
5. Lift the right edge of the cover and swing it to the left
3
.
6. Remove the cover
4
.
Figure 5-10. Removing the Memory Expansion
Compartment Cover
✎
Memory expansion compartment covers are available with carbon
finish for Evo Notebook N1005 models and silver finish for
Presario 900 models, and are included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001.
272638-001.book Page 13 Thursday, July 25, 2002 4:21 PM