User`s guide

To replace the display shield, lay it inside of the display enclosure.
To replace the latch, attach the spring to the latch and snap them into the
display enclosure.
To replace the clutch and pin, reverse the previous steps.
Compaq Contura Aero 4/33C Display
To remove the color VGA backlit display assembly from the Compaq Contura
Aero 4/33C Personal Computer, follow these steps:
1. Remove the battery pack (Section 3.4).
2. Remove the display bezel (Figures 3-5 and 3-6).
3. Remove the CPU cover (Section 3.5).
4. Remove the keyboard (Section 3.6).
5. Release the ZIF connector attaching the display cable to the system
board (Figure 3-23).