User`s guide

1. Remove the battery pack (Section 3.4).
2. Remove the display bezel (Figures 3-5 and 3-6)
3. Remove the CPU cover (Section 3.5).
4. Remove the keyboard (Section 3.6).
5. Remove the power supply (Section 3.8).
6. Remove the trackball (Section 3.9).
7. Remove the hard drive (Section 3.10).
8. Using a hex socket driver, remove the six screw locks from the rear of
the computer that secure the connectors to the chassis (Figure 3-46).
9. Open the computer and remove the two remaining standoffs from the system
board with a hex socket driver (Figure 3-47).