User`s guide

Message: 164 Memory Size Error
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Increase in the memory size found compared to the one
stored in CMOS
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
Message: 164 Memory Size Error
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Decrease in the memory size found compared to the one
stored in CMOS
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
Message: 167 Lost Power
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Real time clock/calendar battery
Recommended Action: Replace real time clock battery.
---------------------------------------------------------------------------
Message: 167 Lost Power
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: RTC has lost power. This only shows up on a cold boot,
no beeps
Recommended Action: Replace real time clock battery.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: RAM failure
Recommended Action: 1. Replace the memory expansion board (Figure 5-1).
2. Replace the system board.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Memory test data error
Recommended Action: 1. Replace the memory expansion board (Figure 5-1).
2. Replace the system board.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error