Setup guide

28
Figure 9 Circuit Board Connector and Rails
8. Firmly push the boards completely into their slots. This will seat
the boards into their connectors.
9. Tighten the captive thumbscrews.
Figure 10 Four-Channel Avid Meridien I/O Box
Guide rail Guide railBoard connector
Channel 3 and
channel 4 label
goes here
Channel 1 and
channel 2 label
goes here
AUDIO IN CHAN 4
AUDIO IN CHAN 2
AUDIO IN CHAN 3
AUDIO IN CHAN 1
AUDIO OUT CHAN 3
AUDIO OUT CHAN 1
AUDIO OUT CHAN 4
AUDIO OUT CHAN 2
0474101A.fm Page 28 Thursday, December 14, 2000 4:25 PM