Setup guide

29
10. Locate and adhere the labels that are included with the upgrade
kit to the locations shown in Figure 10:
- The channel 1 and channel 2 label is placed beside the lower
2 two-channel audio I/O board.
- The channel 3 and channel 4 label is placed beside the upper
2 two-channel audio I/O board.
Compaq Professional Workstation AP500 Errors
When you restart your Compaq Professional Workstation AP500 for
the first time after you have removed the Release 1.x hardware and
installed the new hardware, you might have error dialog boxes appear
or error messages appear in the Windows NT Event Log. If error
messages appear, clear the errors as follow.
To clear error messages:
1. Click the Start button and select Shut Down.
2. Select the “Shut down the computer?” option.
3. Click Yes.
Allow the system to shut down.
4. Restart the system.
5. Press the F10 key when prompted to enter the Compaq Utility.
6. Select your native language using the arrow keys and press Enter.
The Welcome to Compaq Utilities dialog box appears.
7. Press Enter.
The Compaq Utilities window opens.
8. By default, Computer Setup is highlighted. Press Enter.
The Computer Setup window opens.
0474101A.fm Page 29 Thursday, December 14, 2000 4:25 PM