Setup guide

30
9. Choose Save Changes and Exit from the File menu.
The Compaq Utilities window reopens.
10. Using the arrow keys, select Exit from this utility, and then press
Enter.
A dialog box appears asking you to confirm that you want to exit.
11. Press Enter.
Allow the system to restart. The error messages should not appear.
Software Files and Utilities
After you have installed the hardware needed for NewsCutter
Release 2.x, you must use the Avid NewsCutter Release Notes to
complete the upgrade. Drivers are installed when you install the
application. The release notes describe the following functions:
• NewsCutter Release 2.x application can be installed only after
removing earlier releases of the NewsCutter application.
• Dongle Versioner is a software program used to update the Avid
system’s application key (dongle). In most cases this is a separate
floppy disk shipped with your software.
• Avid Video I/O Utility updates the firmware on the video I/O
board and the optional SDI board inside the Avid Meridien I/O
box.
• AvidStartup Utility sets the optimal read and write performance
between the Avid MediaDrives and SCSI controller board.
• Disk Mounter Utility is an Avid utility that allows you to easily
move striped sets of drives from one Avid system to a second Avid
system.
0474101A.fm Page 30 Thursday, December 14, 2000 4:25 PM