Troubleshooting guide

NOTE: The inverter board of the CTFT (10.4 in) display fits partially
behind the display. Loosen the screws on the display to slide the
inverter out from behind the display.
5. Remove the inverter board (Section 5.19).
6. Remove the display cable and backlight cable from the inverter board
(Section 5.19).
7. Remove the four screws that secure the panel to the display enclosure
(Figure 5-99).
8. Carefully rotate the CTFT (10.4 in) panel down and out of the display
enclosure
,
la
y
in
g
the
p
anel
g
entl
y
on the ke
y
board assembl
y
(
Fi
g
ure
5-100).
,ygpgy y y(g