Troubleshooting guide

Table 2-9. Serial Test Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1101 - xx Serial port test 1. Check port configuration
failed 2. Replace the system board and retest.
===========================================================================
Table 2-10. Hard Drive Test Error Codes
===========================================================================
Error Code Description Recommended Action
===========================================================================
1701 - xx Hard drive format The following steps apply to error
test failed codes 1701 - xx through 1736 - xx:
1702 - xx Hard drive read test 1. Run the Diagnostics Utilities
failed and verify drive type.
2. Replace the hard drive and retest.
1703 - xx Hard drive write/ 3. Replace the system board and
read/compare test retest.
failed
1704 - xx Hard drive random
seek test failed
1705 - xx Hard drive
controller test
failed
1706 - xx Hard drive ready
test failed
1707 - xx Hard drive
recalibration test
failed
1708 - xx Hard drive format
bad track test
failed
1709 - xx Hard drive reset
controller test
failed
1710 - xx Hard drive park
head test failed
1715 - xx Hard drive head
select test failed
1716 - xx Hard drive
conditional format
test failed
1717 - xx Hard drive ECC *
test failed
1719 - xx Hard drive power
mode test failed
1724 - xx Network preparation
test failed
1736 - xx Drive monitoring
test failed
---------------------------------------------------------------------------
* ECC = Error Correction Code
===========================================================================