Troubleshooting guide

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Metal objects can damage the battery pack and the connectors inside the
compartment. To prevent damage, do not let metal objects touch any of the
connectors. Do not place any objects other than the battery pack in the
battery compartment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
9. Close the empty battery compartment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When installing a battery pack, do not drop it into the compartment. There
are pressure sensitive contacts at the bottom of the compartment that can
be damaged or crushed, resulting in intermittent charging, power, or loss
of functionality. To install a battery pack, open the battery compartment,
hold the unit at a 45- degree angle, and gently slide the battery pack into
the compartment.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
10. Remove any installed PC Cards by pulling the top or bottom PC Card
release lever to the left to release the card. (PC Card release levers
are located on the front of the computer on the left side.) Gently
grasp the card and pull it out (Figure 5-6).