User Guide

2-8 Troubleshooting
File Menu
Begin here To do this
System information
■ View identification information about the
computer, docking base, and battery
packs.
■ View specification information about the
processor, memory and cache size, and
ROM date and family.
Save to floppy Save system configuration to a diskette.
Restore from floppy Restore system configuration from a
diskette. (The diskette contains your
personal configuration, so you should
restore from the diskette before using the
System Recovery CD-ROM.)
Restore defaults Replace configuration settings in Computer
Setup with factory default settings.
(Identification information is retained.)
Ignore changes and exit Cancel changes entered during the current
Computer Setup session, then exit and
restart the computer.
Save changes and exit Save changes, then exit and restart the
computer.
Security Menu
Begin here To do this
Setup password Enter, change, or delete a setup password.
Power-On password Enter, change, or delete a power-on
password.
Password options Enable/disable:
■ QuickLock/QuickBlank.
■ Lock keyboard and pointing stick or
touchpad at startup.
(These features can be enabled only when
a power-on password is set.)
DriveLock passwords Enter, change, or delete a DriveLock
password.
Device security Enable/disable
■ Ports or diskette drives.
■ Diskette write.
■ CD-ROM or diskette startup.
NOTE: Settings for a DVD-ROM can be
entered in the CD-ROM field.
System IDs Enter identification numbers for the
computer, a docking base, and
battery packs.