User Guide

5-10 Removal and Replacement Procedures

2. Tilt the computer at an angle

so the bottom of the computer is accessible

(Figure 5-8).

3. Slide the front MultiBay release latch

toward the back of the computer.

4. Grasp the MultiBay battery pack using the recess

beneath the battery bay and

remove the MultiBay battery pack.

Figure 5-8. Removing a MultiBay Battery Pack

Removing a Dual-MultiBay Battery Pack

1. If the computer is turned on, the battery bay does not contain a charged battery pack,

and the system is not connected to external power, initiate Suspend (Standby) by

pressing the suspend button.

NOTE: Extensive drive activity may delay Suspend (Standby). The computer screen

clears and the power/suspend light begins to flash when Suspend (Standby) is

initiated.

If the computer is turned off or in Suspend or Hibernation, proceed to Step 2.