User Guide

Removal and Replacement Procedures 5-29
Removing a Memory Expansion Board
1. Lift and hold back the memory insulator
1
. The insulator is not removable
(Figure 5-25).
2. Spread the retaining tabs apart
2
. The memory expansion board tilts upward.
3. Lift the edge of the memory expansion board and slide it gently out of the memory
expansion slot at a 45-degree angle
3
.
Figure 5-25. Removing a Memory Expansion Board
4. Place the memory expansion board in an electrostatic-safe container.
5. If no memory expansion board is to be installed, reset the memory insulator.
6. Replace the memory expansion compartment cover and install the screw.